Model: NCMO-5G4W10CW MANUAL
NCM Supplies Inc.
8125 NW 64
th
ST. Miami, Florida 33166
Phone: 305-640-0461 Fax: 305-639-2684
ncm@ncmsupplies.com
|
www.ncmsupplies.com
Unless otherwise noted, the above specifications reflect typical device performance at stated reference levels in the recommended operating configuration(s).
Specifications are subject to change without notice.
NCMO-5G4W10CW MANUAL (1.1Rev2020) © 2000-2020 NCM Supplies
–
All Rights Reserved
1.4 Panel LED Description
LED
Status
Description
POWER
On
The device is powered up.
Off
The device is powered down.
PON
On
The device has registered to the PON system.
Blink
The device is registering the PON system.
Off
The device registration is incorrect.
LOS
Blink
The device does not receive optical signals.
Off
The device has received optical signal.
SYS
On
The device system runs normally.
Off
The device system runs abnormally.
WIFI
On
The WIFI interface is up.
Blink
The WIFI interface is sending or/and receiving data (ACT).
Off
The WIFI interface is down.
WPS
Blink
The WIFI interface is securely establishing a connection.
Off
The WIFI interface does not establish a secure connection.
LAN1~LAN4
On
Ethernet connected properly (LINK).
Blink
Ethernet is sending or/and receiving data (ACT).
Off
Ethernet connection exception or not connected.
Worn
(CATV)
On
Input optical power is higher than 3dbm or lower than -13dbm
Off
Input optical power is between -13dbm and 3dbm
Normal
(CATV)
On
Input optical power is between -13dbm and 3dbm
Off
Input optical power is higher than 3dbm or lower than -13dbm
Table 3: Panel lights on
1.6 Packing List
After opening the product packaging, please carefully check the items in the following table. If they are inconsistent with the
reality, please contact the supplier.
Table 4: Packing List
Contents
Quantity
ONU
1pcs
Power adapter
1pcs
User manual
1pcs
