NComputing L-Series User Manual rev.05.07.12
Page
31
of
95
Using Your L130 and L230 Access Devices
The available connection list shows the vSpace hosts to which the device can connect. Select a
host from the list and click on the "Connect" button to start.
The "Refresh" button refreshes the available connection list.
The Options Menu
The "Options" button brings up a menu where you can view and change the access device's
settings.
Within the “Options” screen, the "Reset" button resets the access device
The "Info" button brings up a window to view the following information about the access device:
•
Version: the version of firmware running on the access device
•
Build: The build number of the firmware running on the access device
•
Date: The date of the firmware running on the access device
•
Device Model: The model number of the access device
•
Loaded Schema Version: The schema version running on the access device
•
IP Address: The IP address the access device is configured to use
•
Gateway: The IP gateway the access device is configured to use
•
MAC Address: The MAC address of the access device
•
Serial Number: The serial number of the access device
•
Alias: The alias of the access device, defined using the vSpace admin console
•
"Loaded from . . .": How the access device loaded its latest firmware update.