NCR Orderman5 User Manual V01.00
Dual Charger
Orderman GmbH (Part of NCR Corporation)
36
5.2
Commissioning of Dual Charger
The Dual Charger is used to charge up to two batteries simultaneously.
Two operating modes are available with the Dual Charger.
1. Charging Mode:
Standard charging to charge the batteries as quickly as possible.
2. Maintenance Mode:
Use this mode, if you plan to leave the handhelds in the Dual
Charger for a longer period (several days to weeks) before use, particularly to protect the
batteries.
The switch for the operating modes is located on the base of the Dual Charger's housing.
The two LEDs display the unit's mode during the boot process.
5.2.1
Charging Mode
In charging mode, the LED for the respective charging slot displays the following information:
LED
Meaning
Flashes green
The battery is recharging, the slower the LED flashes,
the higher the charge level.
Steady green
The battery is fully charged.
Alternates green/orange
Error reading battery status, but battery is charging
(error).
Red
The battery is not charging (error).
Fig. 21: Status LEDs for boot process in charging mode