7197 Series II Owner’s Guide
Chapter 6: Commands
August
2011
87
This command is available in 7194 Native Mode and 7197 Series II Native Mode only.
Vertical Positioning and Print Commands
The vertical positioning and print commands control the vertical print positions of
characters on the receipt.
Print and Feed Paper One Line
ASCII:
LF
Hexadecimal:
0A
Decimal:
10
Prints one line from the buffer and feeds paper one line.
Example:
MSComm1.Output = Chr$(&H0A)
Related Information:
Carriage Line Feed, prints and feeds only one line.
Print and Carriage Return
ASCII:
CR
Hexadecimal:
0D
Decimal:
13
Prints one line from the buffer and feeds paper one line. The printer can be set through the
configuration menu to ignore or use this command. Some applications expect the
command to be ignored while others use it as print command.
Example:
MSComm1.Output = Chr$(&H0D)
Related Information:
See Ignoring/Using the Carriage Return in
Diagnostics
for more information.
Carriage Line Feed, prints and feeds only one line.
Summary of Contents for 7197 II SERIES
