7197 Series II Owner’s Guide
Chapter 6: Commands
August
2011
90
ASCII:
ETB
Hexadecimal:
17
Decimal:
23
Prints one line from the buffer and feeds paper one line. Executes LF on receipt.
Example:
MSComm1.Output = Chr$(&H17)
Set Line Spacing to 1/6 Inch
ASCII:
ESC 2
Hexadecimal:
1B 32
Decimal:
27 50
Default:
0.13 Inch (3.33 mm)
Sets the default line spacing to 1/6 of an inch (4.25 mm).
Example:
MSComm1.Output = Chr$(&H1B) & Chr$(&H32)
Set Line Spacing
ASCII
: ESC
3
n
Hexadecimal
: 1B
33
n
Decimal:
27 51
n
Value of
n
:
n
/406 inches in 7194 Native Mode and 7197 Series II Native
Mode
n
/360 inches in 7193 Emulation Mode
Range of
n
:
0 – 255
Default:
.13 inch (3.37 mm or 7.52 lines per inch, 3 extra dot rows.).
Summary of Contents for 7197 II SERIES
