7197 Service Manual
Appendix C: Ordering Paper and Supplies
August
2011
210
SNMP Setting
Community setting
Items Default
value
Detail
Read Only
public
Show SNMP community read only name.
Maximum length is 16 characters.
Read/Write
Set SNMP community read-write name.
Maximum length is 16 characters.
IP Trap1 setting
Items Default
value
Detail
TRAP
Disable
Select whether SNMP TRAP is “Enable” or “Disable”.
Address
0.0.0.0
Set address of host that receives SNMP TRAP.
Community
Name
Set SNMP TRAP community name.
Maximum length is 16 characters.
IP Trap2 setting
Items Default
value
Detail
TRAP
Disable
Select whether SNMP TRAP is “Enable” or “Disable”.
Address 0.0.0.0
Set
address
of
host that receives SNMP TRAP.
Community
Name
Set SNMP TRAP community name.
Maximum length is 16 characters.
Summary of Contents for 7197 II SERIES
