PIN Pad Mount (Castles Saturn 1000L)
3
Installation Procedures
To install the E-Money device mount on the NCR SelfServ™ Checkout (7350), follow
these steps:
1. Open the Upper Cabinet Door. For more information, refer to
2. Remove the Blanking Plate and Bracket assembly from the Upper Cabinet Door. For
more information, refer to
Removing PIN Pad Blanking Plate
3. Install the PIN Pad device on the PIN Pad mount and bracket assembly. For more
information, refer to
Installing Castles Saturn 1000L PIN Pad on PIN Pad Mount
4. Secure the PIN Pad device and bracket assembly on the Upper Cabinet Door using
four (4) wing nuts.
5. Route the PIN Pad cables. For more information, refer to
