2
Cylindrical Tri-Light
Installation Procedures
To install the Cylindrical Tri-Light, follow these steps:
Note:
7360-K067 Standard Tri-Light/Lane Light Pole with Cable Kit
must be ordered with
this kit when installing on units that are not configured with Tri-Light/Lane Light
device.
1. If necessary, do any of the following:
•
Remove the existing Cylindrical Tri-Light. For more information, refer to
Removing the Cylindrical Tri-Light Assembly
•
Remove the existing Tri-Light/Lane Light (R6). For more information, refer to
Removing the Tri-Light/Lane Light (R6)
•
For units that are not configured with a Tri-Light/Lane Light device, a standard
Tri-Light/Lane Light Pole must be installed before installing the Cylindrical Tri-
Light. For more information on installing a Tri-Light/Lane Light Pole, refer to
7360-K067 Standard Tri-Light/Lane Light Pole with Cable Kit
.
2. Install the new Cylindrical Tri-Light. For more information, refer to
