4-4
Chapter 4: Operating System Recovery
If No is selected:
•
The Ghost error file is displayed before rebooting only if Ghost
aborts.
Caution:
If the error file is displayed, the batch file pauses for
user input before rebooting. You may use Ctrl-C to cancel out of
the batch file if you want to see the error file again, but nothing
should be done that writes to the hard disk before rebooting.
GHOST.ERR is on the RAM disk and is lost on reboot.
12.
Select which type of recovery you want to perform from the next
menu (normally option #1).
1)
Redo entire disk with the first partition the same size.
2)
Redo the first OS partition.
3)
Redo the second OS partition.
The Ghost software then begins the disk recovery from the CD. It
displays a progress bar and gives you an estimate how long the
process should take.
When the recovery process is completed, the client hard disk is
restored to its preinstalled condition, as originally received from the
factory.
13.
At the completion of the recovery process remove the CD and press
ENTER
to reboot the terminal.
14.
Enter Setup when the terminal reboots and reset the
Parallel
CD-ROM Boot
to
Disabled
.
Completing the OS Installation (Win2000)
The system automatically reboots when the image recovery is complete
and starts the software installation. This installation also installs most of
the additional software and drivers that are included in the disk image.
Complete the installation as follows.
1.
After the terminal reboots, it will perform a disk check and then
continue with the Windows 2000 installation.
2.
Enter the User Name and Organization.
Summary of Contents for 7401 Web Kiosk
