B-8
Appendix B: Feature Kits
Setting Up the PCMCIA Modem
For 7401s with the Pentium III/Celeron running Windows NT, the
following two options show how the system can be configured and
what peripherals can be attached.
Set-Up Option 1
Set the modem is to use IRQ5 and I/O Address 3E8. This option gives
the user access to COM1 and COM2 (for use of scanner and printer),
MSR, Disk-On-Chip, and Parallel Port. Onboard LAN boot is the only
option disabled.
Bios Option
Setting
Default (Y / N)
Serial Port A
3F8 IRQ4
Y
Serial Port B
2F8 IRQ3
Y
Parallel Port
378 IRQ 7
Y
Floppy Disk Controller
Enabled
Y
Serial Port C
Disabled
N
Serial Port D
Disabled
N
Disk-On-Chip
CE00-CFFF
Y
MSR Address
CC00-CDFF
Y
MSR IRQ
15
Y
On-board Intel LAN ROM*
Disabled
N
On-board Intel PXE*
Disabled
N
Parallel CD-ROM Boot
Optional
N
* With this configuration the LAN Boot will be disabled. This does
not prevent LAN from working under OS.
** Parallel CD-ROM Boot can either be enabled or disabled.
Summary of Contents for 7401 Web Kiosk
