Appendix B: Feature Kits
B-11
Set Parallel Port to Bi-directional Mode
It is recommended that you configure the terminal parallel port to Bi-
directional Mode. This will ensure error-free data transfer.
1RWH
This is the default BIOS setting and may not be necessary to set.
1.
With the hardware connected as previously described, apply power
to the terminal.
2.
When prompted, press <F2> to enter the BIOS Setup Utility.
3.
Select the Advanced Menu.
4.
Select the I/O Device Configuration.
5.
Arrow down to the Parallel Port, Mode.
6.
Use the space bar to select Bi-directional Mode.
7.
Press <Esc> to exit the submenu.
Using the CD-ROM for OS Recovery and BIOS Update
The primary purpose for the External CD-ROM is for OS recovery and
BIOS update purposes. This software is distributed on bootable
CD-ROM media, which temporarily installs the drivers during boot.
Refer to the OS Recovery Procedures or BIOS Update Procedures chapters
for additional information.
Summary of Contents for 7401 Web Kiosk
