3-6
Chapter 3: Installing Optional Hardware Features
10.
Connect the PC-compatible keyboard cable (optional) to the 5952
DynaKey. The PC keyboard can be used simultaneously with the
5952 DynaKey.
Note:
The cables for the optional scanner and keyboard can be routed
along the same path as the 5952 DynaKey cable or it may be more
desirable to simply route them directly without going down through
the 7452 cabinet.
11.
Snap the Cable Cover on.
12.
Connect LCD Cable to the LCD connector on the Wedge LCD
Board. For board installation information, refer to the 7452
Workstation Hardware Service Guide.
14687
LCD Cable
Keyboard
Adapter Cable
PS/2 Keyboard
Connector
LCD Connector
(Wedge Board)
Keyboard Adapter
Connector (Wedge Board)
13.
Connect one end of the Keyboard Adapter Cable to the Keyboard
Adapter connector and the other end to the PS/2 connector.
Note:
The LCD end of the cable has 5 pins, the PS/2 end has 6 pins.
Summary of Contents for 7452
