NCR 7895 RS232 Configuration Setup Guide Rev. B
Page 6 of 12
c.
Select 7895 latest Firmware Plug-in (Configuration wizard will
automatically show)
d.
Set
Configuration name
following the naming convention below.
•
Configuration name MUST start with
NCR7895
•
Configuration name MUST end with
CFG
Example
:
NCR7895_
DF
_CFG
e.
Add
Notes
for brief description of the configuration file (optional).
f.
Proceed to step 5.
4.
To create configuration file based on the scanner’s current settings,
a.
Click “
Clone/modify my connected scanner settings
”
menu
.
Scanner’s
current configuration file summary will show.
b.
Click “
Start configuration wizard >>
”.
c.
Proceed to step 5.
5.
On the left menu, click “
2. Cable connection
”. USB options will be shown on
the right by default.
6.
Click “
+add cable
” then select “
Single RS232C
”.
