9
Program the Imager Module
The RealScan Remote Imager provides a limited number of symbologies enabled at
the factory, including the following:
•
UPC–A
•
UPC–E
•
EAN–8
•
EAN–13
•
PDF417
•
GS1 Databar 14 (RSS–14)
•
GS1 Databar Expanded (RSS–14 Expanded)
•
GS1 Databar Coupons
To enable other symbologies not listed above, scan the corresponding bar codes in the
following pages. It is also possible to enable all the bar codes the imager reads, or
selectively enable bar code one at a time.
Some linear barcodes are read by the 7878 itself without help
from the imager module. Enabling these symbologies on the
imager, but NOT on the 7878 causes the 7878 to produce an
error tone when it receives the data from the imager.
Such linear symbologies must be enabled on both scanners.
Summary of Contents for K350
