Chapter 3: Hardware Installation
3-9
8.
Connect
the
cables
to
the
DynaKey.
•
Connect
the
terminal
DVI
cable
to
the
DynaKey
DVI
connector.
•
Connect
external
USB
devices
to
the
DynaKey
USB
connectors
(optional).
•
Connect
the
terminal
Powered
USB
cable
to
the
DynaKey
Powered
USB
connector.
Note:
As
an
option
the
DynaKey
can
be
power
from
an
external
power
brick.
9.
Route
the
cable(s)
through
the
upper
half
of
the
Checkstand
Base
and
install
the
Thumbscrew
and
the
Front
Cover.
Be
sure
to
leave
enough
slack
in
the
cable(s)
to
permit
easy
tilting
of
the
DynaKey.
10.
Route
the
cable(s)
into
the
lower
half
of
the
Checkstand
Base
and
through
the
countertop.
11.
Slide
the
Side
Cover
onto
the
lower
half
of
the
Checkstand
Base.
12.
Slide
the
upper
half
of
the
Checkstand
Base
into
the
lower
half
of
the
Checkstand
Base
and
tighten
the
Thumbscrew.
