3-14
Operation and Cleaning
Using the PCAP Touchscreen
To use the PCAP touchscreen, do any of the following:
•
Use a single finger to resemble the left mouse button.
•
Use two fingers to zoom IN (fingers brought together) or zoom OUT (fingers pulled
apart).
•
Use a circular motion with your finger to rotate an element on the screen. This
function must be supported by either the Operating System or the application.
Cleaning the Touchscreen
Touchscreens can be effectively cleaned with water or up to 70% isopropyl alcohol
solution. Follow these steps to avoid damage to the touchscreen:
Warning:
Do not use sharp objects to clean around the edges of the touchscreen. Do
not use abrasive cleaners (powders) or abrasive cleaning materials (scrub brush,
scouring pad).
Warning:
Do not use Windex or any similar alkaline (weak base) cleaner as it can
degrade the anti-glare coating.
1. Clean the screen using a non-abrasive cloth (microfiber cleaning cloth or cloth towel)
and water.
Warning:
Do not apply any cleaning products directly to the screen. Do not soak
the cloth: wring it out before use.
2. Dry the screen with another soft cloth.
3. Clean the screen further using a cloth dampened with isopropyl alcohol solution, or
using pre-packaged wipes.
Warning:
Do not apply any cleaning products directly to the screen. Do not soak
the cloth: wring it out before use.
4. Ensure that the glass and screen edges are completely dry before using the unit.