Routing Maintenance
1. Turn the machine over and press the buckle
on the brush cover to take out the brush.
2. Use the matching cleaning tool to remove
the dust in the roller brush and the roller
brush dirt cavity, and then clean the
entanglement on the roller brush.
3. Re-install the roller brush and press the roller
brush cover fixing buckle.
1. Turn the machine over and pull out the side
brush vertically.
2. Re-install after cleaning the tangled hair
and dirt. Correspond the left brush (L) and
right brush (R) to the letters L and R on the
bottom case, press down to install.
Buckle
Roller Brush
Device
R
(Brush)
L (Brush)
Dust Box
1. Press and hold the dust box button to pull
out the dust box backwards.
2. Open the dust box and take out the
garbage.
Filter
1. After a long time of use, remove the filter
gauze, filter sponge and HEPA filter.
2. Put the removed filter gauze, filter sponge,
HEPA filter, and dust box under the faucet to
rinse.
3. After cleaning, shake off the water droplets,
dry the filter screen and dust box, and wait
until they are completely dry before use.
4. After drying thoroughly, install the filter
gauze, filter sponge and HEPA filter in order.
Filter Gauze Dust
Box Button
Filter
Filter Sponge
HEPA Filter
Roller Brush
Brush Inside
12
