excluded when it is charging, from the passing of current to the
3Lion.
The amount of current that can be charged to the battery is closely related to the type of
alternator installed on the vehicle. The higher its power, the greater the amount of current
that the
3Link
can draw from it. Alternator powers below 120A are not recommended, as
the battery's fast charge capacity will not be fully exploited.
Immediately after performing all connexions, the system starts up and several
screens for setting the system parameters appear on the display as shown below.
SCREEN
MEANING AND FUNCTIONS
Setting the language.
Click on the desired flag and then on the
arrow to confirm your choice.
Setting the language.
Click on the desired flag and then on the
arrow to confirm your choice.
Setting the capacity.
The number below the letter Ah indicates the
capacity setting of the battery or the battery pack. Click on the
keys or until you reach
the desired value. In the case of a
battery pack (i.e. multiple
3Lion
batteries in parallel), enter the
total capacity of the pack (that is, the sum of the Ah of each
battery).
The bottom of the screen allows you to select the presence of
Power Service PLUS/GOLD. In case of presence, click on the
check (which immediately after the click becomes green). In
case of absence, click on
To confirm the choices click on the arrow ; to go back, click
on the arrow
