Setting the date
. Click on the keys until
the desired
value is reached, taking into account that the first number to
the left indicates the day, the central number indicates the
month, and the number on the right indicates the last two
digits of the year.
To confirm your choices, click on the arrow ; to go back,
click on the arrow
Selecting the time.
Click on the keys
until the desired
value is reached, taking into account that the number on the
left indicates the hours, and the number to the right indicates
the minutes.
To confirm your choices, click on the icon . To go back,
click on the arrow
The system settings screens are displayed at start-up and each time you press
and hold for at least 3 seconds the "Setting" key.
Once the key has been
pressed, the main screen appears as shown below.
The state of charge (or SOC) indication as soon as the system is installed is purely
indicative, it becomes operational as soon as a full charge of
3Lion
is performed.
When it is fully charged, the display will show 100% on the battery state of charge
(SOC) display.
In the lower left part of the screen, information about the
3Lion
battery is shown.
Specifically, the battery state of charge is reported in 2 modes: textual, by means of the
percent value of the SOC, and graphically by the colouring of the notches inside the battery
symbol. The notches are coloured red, orange and green indicating respectively a fully
discharged, a partially charged or a fully charged battery. When the
3Lion
is at the
charging phase, a thunderbolt is displayed overlapping the coloured notches.
