background image

INTRODUCTION

This manual contains important operating and safety instructions, before starting to
use the battery charger it is important to read and understand the safety instructions in
this manual.

Safety notes

Before each use please check the battery charger, the connection cable and the
connector. If any malfunction is detected do not use it! It is strictly forbidden to
open the device. Repairs may only be carried out by qualified technicians using
original spare parts. A charger, a cable and / or a damaged connector increases
the risk of fatal electric shocks.

Do not place the charger on highly flammable surfaces or environments (ex .:
paper, cloth etc ...). The overheating of the device during the charging phases
can increase the risk of fire.

During operation the device should be placed in a well-ventilated place.

If   the   power   supply   cable   is   damaged   it   must   be   replaced   by   a   qualified
technician to eliminate the risk of accidents.

WARNING

   Never charge a cold or non-rechargeable battery!

 

Keep the device out of the reach of children

 

The device must be protected from sunlight or direct heat sources to prevent
overheating.

 

To reduce the risk of malfunctions do not block the ventilation bores.

 

DO NOT install the unit in a sealed environment, otherwise it may overheat.

 

To 

 

avoid 

 

the 

 

risk 

 

of 

 

electric 

 

shock 

 

and 

 

 

or 

 

fire, 

 

make 

 

sure 

 

that 

 

the 

 

power

supply system is in good condition.

 

DO  

 

NOT  

 

use  

 

the  

 

charger  

 

with  

 

damaged  

 

cables  

 

and  

 

/  

 

or  

 

with  

 

inadequate

section.

 

DO NOT use the battery charger in an environment with high humidity or in
direct contact with splashes of water and / or other liquid or in the rain.

1

Summary of Contents for PF12CH25S – 12V 25A









Reviews: