FEATURES
The photos of the product in this manual are only for reference with the purpose of
explanation; the product you have purchased may be different.
This smart battery charger can be used to charge flooded, Gel
and AGM batteries.
15Amp
& 20Amp models are also suitable for
LiFePO4 (lithium) batteries.
Please
read
carefully the label on the product and verify that the default settings of the
charging
algorithm are appropriate for the type of battery to be charged.
Always keep this user manual near the charger for easy reference on
essential safety,
use and maintenance information.
The information in this manual may be subject to modifications without any prior
notification.
NDS Energy
reserves the right to make changes and improvements to the product at
any time without notice and without obligation to relate these changes to previously
distributed devices.
Smart battery charger (main features):
•
High frequency and high-tech battery charger
•
Universal Input 100 to 240VAC with a highly advanced PFC
•
Charging curves entirely controlled by micro controller
•
Designed to have high efficiency in all operating conditions
•
Thermal protection against overheating
•
Operating status indicated by 3 LED (Green - Yellow - Red)
OPTIONAL
•
LEDs extension for a remote indication
•
Soft start and automatic reset of the charging curve when a new battery is
connected.
•
Ability to change the charging curves by DIP-SWITCHES
•
Ability to change the charging current by DIP-SWITCHES
•
Equipped with a Normally Open (NO) relay for main line presence warning.
NOTES
All options can be added and are available on the charger only upon request.
Check the label of the product to verify the features and options in your device.
All NDS smart Battery Chargers have the PFC circuit with universal input.
2