Before installing and using the charger, please set the most suitable charging curve
for the type of battery to be charged. The charger is equipped with
DIP-SWITCHES to select various charging curves, as shown in the following table:
DP1
DP2
PHASES
DESCRIPTION
OFF
OFF
IUIa - AGM
For AGM batteries
OFF
ON
IUIa - Acd
For Lead Acid Flooded traction batteries
ON
OFF
IUUa
Generic curve for GEL and AGM batteries
(Default setting)
ON
ON IU - LiFePO4
For LiFePO4 lithium battery
ON
ON
IUIa - GEL
For GEL batteries and all Lead Acid Flooded
(Only for model 12V - 10A)
The DIP-SWITCHES are behind a black plastic cover on the front panel of the
device, so in one of the two shorter sides.
In some models, there are 4 DIP-SWITCHES but only the two switches on the left
are used
FUNCTIONING
After setting the DIP-SWITCHES of the charger, by connecting it to the battery and
to the mains, the device signals the operating status with LEDs of different colors.
According
to
the
model there are
3
or
5
LED
indicators,
as
shown
in
the
following pictures:
The LEDs on the charger have the following meanings:
3
DP1
DP2
ON
ON
DP3
DP4
ON
ON
CHARGING CURVE SELECTION
