NDT Supply.com
7952 Nieman Road
Lenexa, KS 66214 USA
Phone: 913-685-0675
sales@ndtsupply.com
Fax: 913-685-1125
www.ndtsupply.com
Ultrasonic Cleaners
These SH-Series line of ultrasonic cleaners includes seven models with sizes ranging from
46 Liter (18 gallon), 28 Liter (7.5 gallon), 17 Liter, 15 Liter (4 gallon), 10 Liter, 6 liter, 4 liter,
3 Liter, 2 liter, and 0.7 liter. Each model is constructed using durable industrial style 40
kHz transducers. These provide increased cleaning power along with built in sweep
frequency to ensure uniform cleaning activity throughout the bath. The five larger sizes
have built in drains. Each model has a digital timer and mechanical thermostat, with a
power switch/fuse in the rear of the machine.
When you first fill your unit
,
or refill it with fresh solution
,
use warm water for the solution
.
Turn on the heater (Rotate the HEAT knob to 45, if available. The 0.7 liter units don’t have
a heater.), turn on the ultrasonics (press the green on touch screen button, and use the
arrow buttons for timing purposes)
,
add the cover, and the solution will heat quickly to
temperature.
Accessories For Your Cleaner
Accessories include a cover and a mesh basket.
Unpacking Your Cleaner
Please check your cleaner and its carton carefully for any external or internal damage.
If
you find damage, contact your shipping carrier immediately,
before contacting your
distributor. Please retain your packaging for future use
.
Installing Your Cleaner
Check the plate on the back of the cleaner for correct power requirements. Position your
cleaner within easy reach of a standard grounded electrical outlet. Do not place the cleaner
on a circuit which could become overloaded.
If your cleaner does not operate correctly, first refer to the troubleshooting section for
possible causes
,
or contact an authorized service center listed at the back of this manual,
for additional information.