Neat Bar Pro
Neat Bar comes with
everything you need to get
started, including cables,
wall mount, screen mount
and table stand.
In the box
Neat Bar Pro: Video conferencing
device
HDMI cable: 6.5ft (2m)
Ethernet cable: 9.8ft (3m)
Power cord: 9.8ft (3m)
Mount adapter, wall mount, screen
mount and table stand
Screws for mounting to the wall are not included. Mounting on a wall should only be performed
by qualified personnel in line with applicable facility and state regulations. The wall and the
mounting equipment must safely withstand the load of the product.
Neat Bar Pro
Mount adapter
Table stand
Screen
mount
Wall mount
Slide the selected
bracket onto the
mount adapter
and secure with
the hex wrench.
4 × M8 screw (0.94 in / 24 mm) for VESA mount
4 × M6 screw (0.94 in / 24 mm) for VESA mount
2 × spacer (to secure parallel TV mount)
1 × 5 mm hex key for the screen mount
1 × 2 mm hex key for the mount adapter
2 additional screw bags for dual or triple screen setup
4 × M8 screw (0.94 in / 24 mm) for VESA mount
2 ×
4 × M6 screw (0.94 in / 24 mm) for VESA mount
4 × spacer (to secure alignment of all screens)
