4. ADJUSTMENTS
www.neatech.it
16
Footrests inclination
Loosen the screws shown in Figure 11, so that it is possible to
adjust footrest inclination. Rotate the footrest to reach the desired
position. Tighten the screws again.
Figure 11
Footrests depth
Unscrew the screws shown in Figure 11 and position the footrest in
the desired position. Tighten the screws again.
NOTE: Use a 4 mm allen
wrench.
Summary of Contents for Pegasus Evo
Page 4: ......
Page 29: ...6 CONTROL AND MAINTENANCE www neatech it 24...
Page 35: ...8 FAULT REPAIR AND ASSISTANCE...