background image

NOTE: Before using the MYCRO, it is best to fully charge the unit.

(MYCRO should fully recharge in less than 2 hours )

A Micro USB to USB charging cable is included to charge the MYCRO. 

• Charging indicator will glow 

RED

 

   when battery is charging.
• Charging indicator will glow 

GREEN

 

   when battery is fully charged.

CHARGING INSTRUCTIONS

The MYCRO is also equipped with a Direct-to-Low feature, which will 
reverse the normal lighting sequence, starting with RED light, GREEN 
light, LOW, MEDIUM and HIGH. Press and hold the Primary Button from 
Off for 2 seconds to activate. 

After light has been turned OFF, the MYCRO will default to the normal 
light cycle: HIGH, MEDIUM, LOW, GREEN and RED 

DIRECT-TO-LOW FEATURE

Mode Recall Feature remembers the last used light mode.  If any light 
mode (except Turbo) is left on for more than 8 seconds, the next press 
of the Primary Button will turn the light OFF.  When pressed again, the 
MYCRO will automatically recall the last used light mode.  The normal 
light mode sequence (HIGH, MEDIUM, LOW, GREEN and RED) will begin 
upon the next press of the Primary Button, unless the Mode Recall 
Feature is again activated.

MODE RECALL FEATURE

HIGH
150 LUMENS

• 1 Hour
• 51 Meters

TURBO MODE
400 LUMENS

• 30 Seconds
• 82 Meters

MEDIUM
50 LUMENS

• 2 Hours
• 31 Meters

LOW
15 LUMENS

• 5 Hours
• 18 Meters

GREEN

• 40 Hours
• 1 Meter

RED

• 40 Hours
• 1 Meter

The MYCRO features 2 power buttons, the Primary Mode Button and 
Turbo Mode Button.

Turbo Mode Button

 

• Press and hold for momentary Turbo
  activation. Release button to restore
  previous mode.

Primary Button

 

• Press 1x for HIGH
• Press 2x for MEDIUM
• Press 3x for LOW
• Press 4x for 

GREEN

• Press 5x for 

RED

Turbo Mode 
Button

Turbo Mode 

Button

Primary 
Button

Primary Button

LIGHTING INSTRUCTIONS

Reviews: