4
2.1
MOUNTING
The LED fixture can be operated in any position at any angle. When
mounted on a flat surface, the surface must be strong enough to support
10 times the weight of the fixture and stable so that the will be no damage
caused to the fixture or surrounding people or objects because of
movements of the fixture on the surface.
When the unit is mounted in a hanging position, the fixture is attached
using the mounting brackets and a standard truss clamp or other clamping
device. The mounting brackets supplied are mounted using quick-release
locks allowing simple mounting or removal.
UPRIGHT
HANGING
IMPORTANT SAFETY NOTE!!
Always use a safety cable when installing this unit!!
Be sure that the safety cable is connected to a solid load-bearing structure.
2
INSTALLATION
Safety cable
Quick-release lock
Clamp
5
2.3
FUSE REPLACEMENT
◆
Remove the safety cap by a screwdriver.
◆
etch the old fuse from safety cap.
◆
nstall a new fuse.
◆
nstall the safety cap.
F
I
I
Fuse
Safety Cap
The LED fixture can be used as a stand alone unit. The stand alone
functions AUTO 1, AUTO 2 and CUSTOM can be activated without the
need to connect to any controller or connecting to any other equipment.
Simply, access the <operation> menu from the DISPLAY and select the
target program to activate.
2.2 SETTING UP (STAND ALONE)
