2.2
FUSE REPLACEMENT
SAFTY CAP
FUSE
●
● F
● I
● I
Remove the safety cap by a screwdriver.
etch the old fuse from safety cap.
nstall a new fuse.
nstall the safety cap.
2.3
SAFETY WARNING
IMPORTANT
【
ALWAYS READ THE USER MANUAL BEFORE OPERATION.
】
【
PLEASE CONFIRM THAT THE POWER SUPPLY STATED ON THE
PRODUCT IS THE SAME AS THE MAINS POWER SUPPLY IN YOUR AREA.
】
●
This product must be installed by a qualified professional.
●
Always operate the equipment as described in the user manual.
●
A minimum distance of 0.5m must be maintained between the equipment and combustible surface.
●
The product must always be placed in a well ventilated area.
●
Always make sure that the equipment is installed securely.
●
DO NOT stand close to the equipment and stare directly into the LED light source.
●
Always disconnect the power supply before attempting and maintenance.
●
Always make sure that the supporting structure is solid and can support the combined weight of the
products.
●
The earth wire must always be connected to the ground.
●
Do not touch the power cables if your hands are wet.
ATTENTION
●
This product left the place of manufacture in perfect condition. In order to maintain this condition
and for safe operation, the user must always follow the instructions and safety warnings described
in this user manual.
●
Avoid shaking or strong impacts to any part of the equipment.
●
Make sure that all parts of the equipment are kept clean and free of dust.
●
Always make sure that the power connections are connected correct and secure.
●
If there is any malfunction of the equipment, contact your us immediately.
●
When transferring the product, it is advisable to use the original packaging in which the product
left the factory.
●
Shields, lenses or ultraviolet screens shall be changed if they have become damaged to such an
extent that their effectiveness is impaired.
●
The lamp (LED) shall be changed if it has become damaged or thermally deformed.
●
Fuse:6A,250V
.
.4.
