© Lanta Lighting™ 2016. Terms Apply. All trademarks are the property of their
respective owners. E&OE. All specifications and details are correct at time of print.
September 2016 - Version 3
Nebula Smoke 400v3™ Owner Handbook
Nebula Smoke 400v3
™
The LANTA Nebula Smoke 400v3™ must be mounted on a firm, level surface. It must not
be used on an unstable, unlevel surface. Ensure there is adequate ventilation around the
product. It must only be used horizontally, do not tilt or operate on an incline when using
fluid, as this may spill out and damage the product and invalidate the warranty. Ensure
that there is a 50cm clearance from the nozzle to any surface and that the smoke is not
directed at someone’s face.
NB. This is an indoor rated product. Do NOT use outdoors.
HOW TO OPERATE
1. Remove the tank bottle cap and fill with Lanta Smoke Fluid (sold separately).
1.
Do NOT overfill.
2. Replace the tank cap securely.
3. Plug in the wired remote and the mains cable directly into the machine.
DO NOT CONNECT THESE TWO CABLES DIRECTLY TOGETHER.
4. Plug into Mains and switch on.
5. The red LED on the remote will illuminate to signal the machine is in a heating cycle.
6. When the machine has reached operating temperature the green LED will illuminate.
7. Press the button on the control to emit smoke, release to stop.
Nebula Smoke 400v2
™
Owner Handbook
Nebula Smoke 400v3
™
Owner Handbook
