background image

Ceramic Glass Cooktop (Electric Cooktop) 
Installation Instructions 

and 

User Guide 

 

 

Contents

 

 

1

Safety and warnings

 

 
2

Installation instructions 

 
3

Introduction

 

 
4

Using Your Cooktop

 

 
5

Cooking guidelines 

 
6

Care and cleaning

 

 
7

Troubleshooting

 

 
8

Warranty and service

 

 
Important! 

SAVE THESE INSTRUCTIONS 

 

The models shown in this user guide may not be available in all markets and are 
subject to change at any time. For current details about model and specification 
availability in your country, please visit our local website listed on the back cover 
or contact your local dealer. 

 

 

1

Safety and Warnings 

Your safety is important to us. Please read this information before using your cooktop. 

 
 

Installation 

Electrical Shock Hazard 
1. 

Disconnect the appliance from the mains electricity supply before carrying 
out any work or maintenance on it. 

2. 

Connection to a good earth wiring system is essential and mandatory. 

3. 

Alterations to the domestic wiring system must only be made by a 
qualified electrician. 

4. 

Failure to follow this advice may result in electrical shock or death. 

 

Cut Hazard 
1. 

Take care - panel edges are sharp. 

2. 

Failure to use caution could result in injury or cuts. 

 

Important safety instructions 

1. 

Read these instructions carefully before installing or using this appliance. 

2. 

No combustible material or products should be placed on this appliance at any 
time. 

3. 

Please make this information available to the person responsible for installing 
the appliance as it could reduce your installation costs. 

4. 

In order to avoid a hazard, this appliance must be installed according to these 
instructions for installation. 

5. 

This appliance is to be properly installed and earthed only by a suitably 
qualified person. 

6. 

This appliance should be connected to a circuit which incorporates an 
isolating switch providing full disconnection from the power supply. 

7. 

Failure to install the appliance correctly could invalidate any warranty or 
liability claims. 

 

 

Operation and Maintenance 
Hot Surface Hazard 

1. 

During use, accessible parts of this appliance will become hot enough to cause 
burns. 

2. 

Do not let body, clothing or any item other than suitable cookware contact with the 
ceramic glass until the surface is cool. 

3. 

Never leave metal objects on the cooktop as they can become hot very quickly. 

4. Keep 

children 

away. 

5. 

Handles of saucepans may be hot to touch. Check saucepan handles do not 
overhang other cooking zones that are on. Keep handles out of reach of children. 

6. 

Failure to follow this advice could result in burns and scalds. 

 
 
 

 
Electrical Shock Hazard 

1. 

Do not cook on a broken or cracked cooktop. If the cooktop surface should break or 
crack, switch the appliance off immediately at the mains power supply (wall switch) 
and contact a qualified technician. 

Summary of Contents for TESCD32E











Reviews: