Alphanumeric Display TEL Features
45
Time and Date
You see the Time and Date on your telephone’s display when it is idle and while using some functions of the
phone. The Time and Date are programmed at the station connected to port 10 (usually extension 10).
Although entered in 24-hour format, the system time always displays in 12-hour format (AM/PM).
1. Press .
2. Press key.
3. Press .
4. Press .
---------------
The Year
---------------
5. Dial four digits for the year. For example, 1999.
6. Dial .
---------------
The Date
---------------
7. Dial two digits (01-12) for the month. Jan.=01, Feb.=02,
etc.
8. Dial two digits (01-31) for the date.
9. Dial .
---------------
The Day
---------------
10. Dial a single digit (0-6) for the day. Sun. = 0, Mon. = 1,
etc.
11. Dial .
---------------
The Time
---------------
12. Dial four digits for the time (24 hour clock). For example,
dial 1305 for 1:05PM.
13. Dial .
14. Press . The display shows the new date and time.
Name Storing (Trunk & Station)
Each Trunk line has an alphanumeric field for easy identification such as LOCAL, SERVICE, SALES, etc.
Extensions can also have names instead of just station numbers. These names show on an extension's display
when the user places or answers calls. Station Names make it easier to identify callers. The user does not
have to refer to a directory when processing calls.
The storing operation (Trunk and Station) is available only from #10 extension.
1. Press key twice.
2. Press a key.
3. Dial .
4. Input the letters of the name by Message Edit Mode
5. Press next Line key and dial for next storing.
or
Press key and key to finish.
To set the date and time (the
entire procedure must be
performed):
To store names for each trunk
line:
SPK
OPAC
CLEAR
∗
∗
∗
SPK
∗
DC
LINE
∗
CLEAR
LINE
∗
ICM
(Extension #10 only)
(Extension No10 only)