background image

General Installation

This device cannot be used or installed without a mounting accessory for support. For proper 

installation it is strongly recommended to use a trained, NEC authorized service person. Failure to 

follow NEC standard mounting procedures could result in damage to the equipment or injury to the 

user or installer. Product warranty does not cover damage caused by improper installation. Failure to 

follow these recommendations could result in voiding the warranty

Mounting

For customer:

CAUTION

DO NOT mount the monitor yourself. For proper installation it is strongly recommended to use a 

trained, qualified technician. Please contact your supplier, as they may be able to provide a list of 

qualified installation professionals. Mounting on a wall or ceiling and hiring a technician is the 

customer’s responsibility.

Maintenance

Periodically check for looses screws, gaps, distortions, or other problems that may occur with the 

mounting equipment. If a problem is detected, please refer to qualified personnel for service.

Regularly check the mounting location for signs of damage or weakness that may occur over time.

DO NOT block ventilated openings with mounting accessories or other accessories.

For NEC Qualified Personnel:

Stability Hazard.

The device may fall, causing serious personal injury or death. To prevent injury, this device must be 

securely attached to the floor/wall in accordance with the installation instructions. Carefully inspect the 

location where the unit is to be mounted. Not all walls or ceilings are capable of supporting the weight 

of the unit. Weight of this monitor is mentioned in Specification (see V554Q IGB on page 15, V654Q 

IGB on page 18, V754Q IGB on page 21, V864Q IGB on page 24). Product warranty does not cover 

damage caused by improper installation, remodeling, or natural disasters. Failure to comply with these 

recommendations could result in voiding the warranty. 

To ensure safe installation, use two or more brackets to mount the unit. Mount the unit to at least two 

points on the installation location.

For further instructions, please refer to standard user’s manual of the base model monitors 

V554Q, V654Q. 

11

Summary of Contents for 3M V Series























Reviews: