Manufacturer’s Recycling and Energy Information
NEC DISPLAY SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the
company’s top priorities in trying to minimize the burden placed on the environment. We are engaged in
developing environmentally-friendly products, and always strive to help define and comply with the latest
independent standards from agencies such as ISO (International Organisation for Standardization) and TCO
(Swedish Trades Union).
Disposing of your old NEC product
The aim of recycling is to gain an environmental benefit by means of re-use, upgrading, reconditioning or
reclamation of material. Dedicated recycling sites ensure that environmentally harmful components are properly
handled and securely disposed. To ensure the best recycling of our products,
NEC DISPLAY SOLUTIONS
offers a variety of recycling procedures
and gives advice on how to handle the product in an environmentally
sensitive way, once it has reached the end of its life.
All required information concerning the disposal of the product and country-specific information on recycling
facilities can be found on our following websites:
https://www.nec-display-solutions.com/p/greenvision/en/greenvision.xhtml
(in Europe),
https://www.nec-display.com
(in Japan) or
https://www.necdisplay.com
(in USA).
Energy Saving
This monitor features an advanced energy saving capability. When a Display Power Management signal is sent
to the monitor, the Energy Saving mode is activated. The monitor enters a single Energy Saving mode.
For additional information visit:
https://www.necdisplay.com/
(in USA)
https://www.nec-display-solutions.com/
(in Europe)
https://www.nec-display.com/global/index.html
(Global)
For ErP requirement/For ErP (Network standby) requirement:
Except for the conditions below:
The monitor is using an Option Board.
INPUT DETECT is set to a setting except for NONE.
USB POWER is set to ON. DisplayPort in the TERMINAL
SETTINGS is set to MST.
Power consumption (Glowing amber): 2.0 W or less (with 1 port connection)/3.0 W or less (with all ports
connection). Time for power management function: 10 sec. (Default setting)
Power consumption (Blinking amber): 0.5 W or less.
Time for power management function: 3 min. (Default setting) (Except for a condition that the monitor has plural
signal inputs.)
21
