background image

E-18

Setting the color temperature

Use this procedure to set color tone produced by the plasma
display.

Example: Setting “HIGH”

On “COLOR TEMP.” of “PICTURE” menu, select “HIGH”.

SEL.

ADJ.

EXIT RETURN

P I C T U R E

P I C T U R E   M E M O RY
C O N T R A S T
B R I G H T N E S S
S H A R P N E S S
C O L O R
T I N T
N R
C O L O R   T E M P.
G A M M A
L OW   TO N E
S E T   U P   L E V E L
C O L O R   T U N E
C I N E M A   M O D E
P I C T U R E   M O D E

:    O F F

:    O F F
:    H I G H
:    2 . 2
:  AU TO
:    0 %

:    O N
:    N O R M A L

G

R

Information

 Setting the color temperature

LOW: 

Redder

MIDDLE LOW:

 Slightly red

MIDDLE:

 Standard (slightly bluer)

HIGH:

 Bluer

Adjusting the color to the desired level

Use this procedure to adjust the white balance for each
color temperature to achieve the desired color quality.

Example: Adjusting the “GAIN RED” of “HIGH” color
temperature

On “COLOR TEMP.” of “PICTURE” menu, select “HIGH”,
then press the  MENU/ENTER button.
The “WHITE BALANCE” screen appears.
On “GAIN RED”, adjust the white balance.

SEL.

ADJ.

EXIT RETURN

W H I T E   BA L A N C E

C O L O R   T E M P.  H I G H

G A I N   R E D
G A I N   G R E E N
G A I N   B L U E
B I A S   R E D
B I A S   G R E E N
B I A S   B L U E
R E S E T

:  O F F

G A I N   R E D

2 0

Information

 

Adjusting the white balance

GAIN R/G/B:

 White balance adjustment for white level

BIAS R/G/B:

 White balance adjustment for black level

RESET:

 Resets settings to the factory default values.

Use 

 

 and 

 buttons to select “ON”, then press the

MENU/ENTER button.

 

Restoring the factory default settings

Select “RESET” under the WHITE BALANCE menu.

Changing the Gamma Curve

This feature adjusts the brightness of the midtone areas
while keeping shadows and highlights unchanged.

Example: Setting “2.3”

On “GAMMA” of “PICTURE” menu, select “2.3”.

SEL.

ADJ.

EXIT RETURN

P I C T U R E

P I C T U R E   M E M O RY
C O N T R A S T
B R I G H T N E S S
S H A R P N E S S
C O L O R
T I N T
N R
C O L O R   T E M P.
G A M M A
L OW   TO N E
S E T   U P   L E V E L
C O L O R   T U N E
C I N E M A   M O D E
P I C T U R E   M O D E

:    O F F

:    O F F
:    M I D D L E
:    2 . 3
:  AU TO
:    0 %

:    O N
:    N O R M A L

G

R

Information

 GAMMA settings

The picture becomes darker as the number increases
(in the sequence of 2.1, 2.2, 2.3, 2.4).

* These values are approximate.

Making the Low Tone adjustments

This feature allows more detailed tone to be reproduced
especially in the dark area.

Example: Setting “2”

On “LOW TONE” of “PICTURE” menu, select “2”.

SEL.

ADJ.

EXIT RETURN

P I C T U R E

P I C T U R E   M E M O RY
C O N T R A S T
B R I G H T N E S S
S H A R P N E S S
C O L O R
T I N T
N R
C O L O R   T E M P.
G A M M A
L OW   TO N E
S E T   U P   L E V E L
C O L O R   T U N E
C I N E M A   M O D E
P I C T U R E   M O D E

:    O F F

:    O F F
:    M I D D L E
:    2 . 2
:  2
:    0 %

:    O N
:    N O R M A L

G

R

Information

 LOW TONE settings

AUTO: 

Will automatically appraise the picture and

make adjustments.

1: 

Will apply the dither method suitable for still pictures.

2: 

Will apply the dither method suitable for motion

pictures.

3: 

Will apply the error diffusion method.

Summary of Contents for 61XR3



































Reviews: