1-12 Getting
Started
!"
“Allow connection with desktop computer when de-
vice is attached” is checked.
!"
“Connect using Serial Port
@
115K” displays.
(Change this setting to 115K, if necessary. If syn-
chronization is unsuccessful, revert to the default of
19200.)
Proceed to the next section to check the availability of the
serial port on your host PC.
Ensuring the Availability of the Serial Port
The serial port on your host PC must be available for syn-
chronization with your NEC MobilePro. Follow these steps
to ensure the availability of the serial port.
1.
Access the setup utility on your host PC to verify that
the port is enabled.
2.
Check the device manager on your host PC to identify
potential conflicts for the serial port. In the Windows
environment:
!"
Go to Start, Settings, Control Panel.
!"
Double click the System icon and select the Device
Manager tab.
!"
Check the Ports listing to determine if any conflicts
exist (another device is assigned to or is using the
serial port). The port may be flagged with an excla-
mation point, for example, if any conflicts exist.
!"
If another device is assigned to or is using the serial
port, you must reassign the device to free up the se-
rial port for MobilePro synchronization.
Proceed to the next section to connect the PC connect
cable.
