1-6 Getting
Started
2.
Locate the release lock on the bottom of the system.
3.
Slide the lock to the unlocked position in the direction
of the arrow as indicated in the following figure.
4.
Put the Lithium-Ion battery pack in the bay and slide
the battery in the direction of the arrow, as indicated in
the following figure.
Inserting the battery pack
A
– Battery release lock
B
– Lithium-Ion battery pack
5.
Firmly press the battery until it is secure and clicks
(locks) into place.
6.
Slide the lock back to the locked position.
Note:
Be sure to slide the lock back to the
locked position. The NEC MobilePro
will not
power
on when the lock is in the unlocked position.
7.
Connect the AC adapter to begin charging the battery.
Refer to the next section, "Connecting the AC
Adapter," for connection information.
