9
Specifications
–continued
Monitor
AccuSync
™
75F
Notes
Specifications
Monitor
Picture Tube
Diagonal:
17 inch
90
°
deflection, 0.24-0.28 mm variable
Viewable Image Size:
16.0 inch
(diagonal) flat dot pitch, 0.20-0.25 mm
variable (horizontal) flat dot pitch,
medium short persistence phosphor,
multi-layered, anti-static screen coating,
semi-tint screen, Invar Shadow Mask and
OptiClear
®
screen.
Input Signal
Video:
ANALOG 0.7 Vp-p/75 Ohms
Sync:
Separate sync. TTL Level
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Display Colors
Analog input:
Unlimited number of Colors
Depends on display card used.
Synchronization
Horizontal:
31 kHz to 70 kHz
Automatically
Range
Vertical:
55 Hz to 120 Hz
Automatically
Resolutions Supported
640 x 480 @ 60 to 120 Hz
Some systems may not support
Resolution based on horizontal and
800 x 600 @ 55 to 110 Hz
all modes listed.
vertical frequencies only
832 x 624 @ 55 to 106 Hz
1024 x 768 @ 55 to 87 Hz ....................... NEC-Mitsubishi Electronics Display cites
1152 x 870 @ 55 to 77 Hz
recommended resolution at
1280 x 1024 @ 55 to 66 Hz
85 Hz for optimal display performance.
Active Display Area
Horizontal:
310 mm/12.2 inches
Dependent upon signal timing used,
(Factory Setting)
Vertical:
232 mm/9.1 inches
and does not include border area.
Active Display Area
325 mm/12.8 inches
Dependent upon signal timing used,
(Full Scan)
244 mm/9.6 inches
and does not include border area.
Power Supply
AC 100 – 240 V, 50-60 Hz
Current Rating
1.5A @ 100 – 240 V
Dimensions
403 mm (W) x 420 mm (H) x 420 mm (D)
15.9 inches (W) x 16.5 inches (H) x 16.5 inches (D)
Weight
16.7 kg
36.8 lbs
Environmental Considerations
Operating Temperature:
0
°
C to +35
°
C
Humidity:
30% to 80%
Feet:
0 to 10,000 Feet
Storage Temperature:
-20
°
C to +60
°
C
Humidity:
10% to 90%
Feet:
0 to 45,000 Feet
NOTE: Technical specifications are subject to change without notice.
AS75/95F.p65
11/2/00, 10:48 AM
11
