NEC AccuSync PV32 User Manual Download

Page: 6 / 60

English-2

Important Information

WARNING

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT

EXPOSE THIS UNIT TO RAIN OR MOISTURE. DO

NOT USE THIS UNIT’S POLARIZED PLUG WITH AN

EXTENSION CORD RECEPTACLE OR OTHER OUT-

LETS UNLESS THE PRONGS CAN BE FULLY

INSERTED.

CAUTION

CAUTION:

REFRAIN FROM OPENING THE CABINET AS THERE

ARE HIGH VOLTAGE COMPONENTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE

SURE POWER CORD IS UNPLUGGED FROM WALL

SOCKET. TO FULLY DISENGAGE THE POWER TO

THE UNIT, PLEASE DISCONNECT THE POWER CORD

FROM THE AC OUTLET. DO NOT REMOVE COVER

(OR BACK). NO USER-SERVICABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

This symbol warns user that uninsulated voltage within the

unit may have sufficient magnitude to cause electric shock.

Therefore, it is dangerous to make any kind of contact with

any part inside this unit.

This symbol alerts the user that important literature

concerning the operation and maintenance of this unit has

been included. Therefore, it should be read carefully in

order to avoid any problems.

Canadian Department of
Communications Compliance Statement

DOC: This Class B digital apparatus meets all requirements of the
Canadian Interference-Causing Equipment Regulations.

C-UL: Bears the C-UL Mark and is in compliance with Canadian
Safety Regulations according to CAN/CSA C22.2 No. 60950-1.

If necessary, the user should contact the dealer or an experienced
radio/television technician for additional suggestions. The user may
find the following booklet, prepared by the Federal Communications
Commission, helpful: “How to Identify and Resolve Radio-TV
Interference Problems.” This booklet is available from the U.S.
Government Printing Office, Washington, D.C., 20402, Stock
No. 004-000-00345-4.

2. This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to part 15 of the FCC
Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy, and, if
not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particu-
lar installation. If this equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:

FCC Information

1. Use the attached specified cables with the ASPV32-AVT,

ASPV40-AVT, or ASPV46-AVT color monitor so as not to
interfere with radio and television reception.

(1) Please use the supplied power cord or equivalent to ensure

FCC compliance.

(2) Please use the supplied shielded video signal cable, 15-pin

mini D-SUB to 15-pin mini D-SUB.

•

Reorient or relocate the receiving antenna.

•

Increase the distance between the equipment and receiver.

•