Section 5: Data and SMDR
Aspila EX Hardware Manual
Section 5: Data and SMDR
5-5
5
Programming SMDR
•
10-21-02 : NTCPU Hardware Setup - Baud Rate for COM Port
If the SMDR connection is made using the COM port on the NTCPU, define the baud rate
(0=4800, 1=9600, 2=19200, 3=38400).
•
14-01-06 : Basic Trunk Data Setup - SMDR Print Out
For each trunk, enter 0 if trunk’s calls should not appear on SMDR report. Enter 1 if trunk’s calls
should appear on SMDR report.
•
15-01-03 : Basic Extension Data Setup - SMDR Printout
For each extension, enter 1 if extension’s calls should appear on SMDR report. Enter 0 if exten-
sion’s calls should not appear on SMDR report.
•
35-01-01 : SMDR Options - Output Port
Specify the output port type (NTCPU/CTA/CTU) for each SMDR type.
•
35-01-04 : SMDR Options - Omit (Mask) Digits
Enter the number of digits (1-24) you want SMDR to block (i.e., “X” out). Enter 0 not to block
any digits.
•
35-01-05 : SMDR Options - Minimum Number of SMDR Digits
Enter the minimum number of digits a user must dial (1-24) before the system includes a call on
the SMDR report. Enter 0 to include all outgoing calls, regardless of the number of digits dialed.
•
35-01-06 : SMDR Options - Minimum Call Duration
Enter the minimum duration of a call (1-65535) that will print on the SMDR report. Enter 0 to
have calls of any duration print.
•
35-01-07 : SMDR Options - Minimum Ringing Time
Enter how long an unanswered call must ring (1-65535) before SMDR logs it as “No Answer”.
Enter 0 to allow all “No Answer” calls to print.
•
35-02-01 : SMDR Output Options - Toll Restricted Call
Enter 1 if you want the SMDR report to include calls blocked by Toll Restriction. Enter 0 to
exclude blocked calls.
•
35-02-02 : SMDR Output Options - PBX Calls
If system is behind a PBX, enter 1 to have SMDR include all calls to the PBX. Enter 0 to have
SMDR include only calls dialed using PBX trunk access code.
•
35-02-04 : SMDR Output Options - Daily Summary
35-02-05 : Weekly Summary and
35-02-06 : Monthly Summary
Enter 1 to enable a summary report. Enter 0 to disable a summary report. The daily report prints
every day at midnight. The weekly report prints every Sunday night at midnight. The monthly
report prints at midnight on the last day of the month.
•
35-02-08 : SMDR Output Options - Incoming Calls
Enter 0 if you want the SMDR report to include incoming calls. Enter 1 if you want the SMDR
report to exclude incoming calls.
•
35-02-09 : SMDR Output Options - Print Name or Number
Enter 0 if you want the SMDR report to include the extension’s name. Enter 1 if you want the
SMDR report to include the extension’s number.
•
35-02-16 : SMDR Output Options - Print Trunk Name or Received Dialed Number
Enter 0 if you want the SMDR report to print the trunk port name (as assigned in Program 14-01-
01). Enter 1 if you want the SMDR report to print the received dialed number. For DID trunks, if
the received number is not defined in Program 22-11-01, then no number will be printed.
•
80-05-01 : Date Format for SMDR and System Reports
Set the date format for SMDR (0=American, 1=Japanese or 2=European).
•
90-12-01 : System Alarm Output - Output Port Type
Indicate the type of connection used for the SMDR (0=No setting, 1=COM port (NTCPU),
2=USB port (NTCPU), 4=CTA/CTU).
CÔNG TY VIỄN THÔNG VIỆT PRO
Chuyên phân phối tổng đài NEC
http://vietpro.com.vn
