NEC AT-35, User Manual

FEATURES 

 
FLASH Key 

The FLASH key works the same as the hook switch of the phone.    When 
the FLASH key is pressed during a conversation, it may terminate the call 
or place the call on hold and you will hear dial tone allowing you to dial the 
next phone number.    The FLASH key may also provide access to special 
facilities such as call waiting and conference calls.    Actual operation will 
depend on the specific PBX to which you are connected. 
 
To activate, press the FLASH key. 

 
 
PAUSE Key 

The PAUSE key is used to insert a 3.6 second pause between digits during 
dialling.    For automatic dialling (One-Touch Dial / Redial), the pause may 
be needed in the dialling sequence to wait for the sound of a dial tone or a 
computer tone (such as computer activated operations like banking and 
voice mail).    A pause can be programmed into any memory location. 
 
To activate, press the PAUSE key when required during dialling. 
You may press the PAUSE key multiple times for a longer pause. 

Last Number Redial

The last telephone number dialled (up to 32 digits) can be redialled 
automatically by pressing the REDIAL key. 
 
1. Pick up the handset (or press the SPEAKER key). 
2. Press the REDIAL key. 
 
You can re-dial the same telephone number as many times as required. 
However, once you dial another number, the previous number is erased. 
(Only the last number you dial will be stored under the REDIAL key). 
 

12