NEC AT-35, User Manual

FEATURES

 
Temporarily Switching Pulse to Tone Dialling 

If your telephone set is connected to a Pulse dialling mode network, this 
feature allows you to temporarily switch to Tone dialling to access Tone 
operated services; e.g. answering machines, telephone banking, etc. 
 
1.  Dial the number of the service you wish to use and wait for answer. 
2. Dial 

¿

 to switch to Tone dialling. 

3.  When you hang up, the phone automatically returns to Pulse dialling. 

Call Hold 

A call in progress may be placed on hold at the telephone by pressing the 
HOLD key.  It may also be possible to place the call on hold at the PBX 
system by pressing the FLASH key.    When the HOLD key is pressed, the 
call remains on the telephone, during which time both parties hear the hold 
melody until the call is retrieved. 
 

Selecting the Hold Melody: 

There are 2 different melodies for the HOLD function.  To select the 
desired melody, follow the procedure below. 
 
1.  Ensure the phone is idle. 
2. Dial 

¿

 5 

¿

. 

3.  Dial 0 or 1 to select the desired melody.    (Default = 0.) 
4. Dial 

#. 

 
Placing a Call on Hold: 

1.  With a conversation in progress on the phone. 
2.  Press the HOLD key. 
3.  If using the handset, you may put the handset back in the cradle. 
4.  To converse with the caller again, pick up the handset (or press the 

SPEAKER key). 

14