NEC AT-35, User Manual

FEATURES

 
Caller ID (CLI) 

This telephone set will display Caller ID (CLI) information received with 
incoming calls.    The last 90 Caller ID numbers received are automatically 
stored in CLI memory (up to 21 digits each).    The numbers stored in CLI 
memory may be reviewed, deleted, or dialled back if desired. 
 
When a new call received with CLI goes unanswered, the NEW CALL light 
will flash.  The number of new (unanswered) calls received with CLI is 
indicated on the bottom row of the display.    Note that the oldest call in the 
list occupies position 01 and new calls are stored at the end of the list.

 
When CLI is restricted by the caller, “NO CLI” is displayed. 
For international and payphone calls, “OUT OF AREA” is displayed. 
 

Date and Time 

Indicates viewing 

Stamp for CLI. 

IN or OUT List.

NEW 
The call was 
unanswered. 

REPEAT 
Call received 
more than one. 

 
Number of 
calls in list. 
 
Number of 
new calls. 

To Review the CLI Memory: 

1.  Press the SEARCH key until the “IN” icon is shown on the display. 
2.  Advance up or down to review received CLI numbers by pressing the 

   or    keys. To view the most recent NEW CALL, press the    key. 

3.  Press the DELETE key to remove the displayed number from the list. 
 

To Dial Back from the CLI Memory: 

1.  Press the SEARCH key until the “IN” icon is shown on the display. 
2.  Advance up or down to the phone number you wish to dial by pressing 

the        or        key. 

3.  When the required phone number is displayed, press the PBX DIAL key, 

SPEAKER key, or lift the handset. The number is automatically dialled. 

16