42xx-IntraMail
423x-Dial Actions (Dial Action Table Options)
4231-Digit Assignment
DSX Software Manual
Voice Mail Options: 4101-4231
◆
913
Voice Mail
4101-4231
Dial Action Table Routing Options
Digits
(0-9, #, and *)
Use Dial Action Table digits to route an Automated Attendant call to a speci
fi
c location (such as an exten-
sion). For example, to set up a STRF Action to route to extension 305, for digit 3 enter STRF for the
Action
and 305 for the corresponding
Routing
.
Features
• None
IntraMail Features
•
Dial Action Table
(page 465)
Options
• Digits
using 0-8, # and * (8 max.)
Default
• See the
Dial Action Table Default Settings
(page 902).
Caller Dialed Digits
(X)
Use the X option to route an Automated Attendant call based on digits the caller dials. Each X entry repre-
sents one caller-dialed digit. For example, to set up a STRF Action to route to any caller dialed extension in
the 300-399 range, for digit 3 enter STRF for the
Action
and XXX for the corresponding
Routing
.
Features
• None
IntraMail Features
•
Dial Action Table
(page 465)
Options
•
X
for caller dialed digit (press Feature Key 3)
Default
• See the
Dial Action Table Default Settings
(page 902).
Ignore Digits
(I)
Use the I option to represent any digit dialed by the Automated Attendant caller that IntraMail ignores for
routing. An example of this is REC action assigned to the * key in Dial Action Table 1 by default. The
Action
is REC2 and the
Routing
is IXXX. This means that a caller can dial * + any mailbox number to leave a
Quick Message in that mailbox. IntraMail ignores the
fi
rst digit dialed by the caller (*), and routes according
to the next 3 digits dialed.
Features
• None
IntraMail Features
•
Dial Action Table
(page 465)
Options
•
I
for ignore caller dialed digit (press Feature Key 2)
Default
• See the
Dial Action Table Default Settings
(page 902).
