TERMINAL SETUP
47
SETUP WITH MENU KEY FOR
DT530 SERIES
TO CHANGE RINGER TONE VOLUME
The procedure below shows how to change the volume of ringer
tone.
1.
Press Menu key while terminal is in an idle state.
Then, select
□
3 Settings.
2.
Select
□
1 Ring Volume.
3.
Ring Volume can be set in 13 levels (0 - 12).
Adjust the ringer tone volume by using UP/DOWN
key and then press the Enter key or the OK soft
key.
TO ENABLE/DISABLE OFF-HOOK
RINGING
The procedure below shows how to enable/disable the off-hook
ringing.
1.
Press Menu key while terminal is in an idle state.
Then, select
□
3 Settings.
2.
Select
□
2 Off Hook Ring.
3.
To disable/enable the off-hook ringing, select
□
1 Disable or
□
2 Enable.
■Default setting is
□
2 Enable.
■The enabled item is highlighted.
