To make a call using One-Touch Speed Dial keys you’ve programmed:
Using handset: Pick up handset and press desired Speed Call key.
Using speakerphone: Press desired Speed Call key. Speakerphone activates and dials
number.
EXAMPLES OF LINE APPEARANCE / FEATURE
KEYS THAT CAN BE PROGRAMMED BY
TELECOMMUNICATIONS
CALLER ID
When a call comes in the number is “captured” and this key will light. You can press
the lit key and scroll through up to 3 missed calls using your display. Stored numbers
can be deleted by pressing the “#” key while being viewed.
FWD-ALL
Takes the place of having to dial #2 to set all calls to forward to another number and
dialing *2 to cancel. In addition, when your phone is forwarded the light on this key is
lit to remind you the feature is activated.
FWD-DA
Takes the place of having to dial #6 to set calls to forward to another number after 4-5
rings and dialing *6 to cancel. In addition, when your phone is forwarded the light on
this key is lit to remind you the feature is activated.
FWD-BY
Takes the place of having to dial #3 to set calls to forward to another number when your
phone is busy and dialing *3 to cancel. In addition, when your phone is forwarded the
light on this key is lit to remind you the feature is activated.
CALL BACK
Takes the place of dialing #1 to have the phone ring you back when you get a busy signal
calling someone on campus or can’t get an outside line.
DO NOT DISTURB
Used to make your line busy to others rather than leaving your phone off-hook. Also
useful to silence the ringing reminder when you have to keep someone on hold for an
extended time. The key lights to let you know the feature is activated.
INTERCOM
Used to dial another DTerm and if their line is not busy. Press this key and you will
activate their speakerphone without them having to touch anything. Requires other
phones to have FNC 5 (Allow Hands-Free Operation) active.
