English-15
English-14
English
Connect To The Power Source
The display should be installed close to an easily accessible power outlet�
Fully insert the prongs into the power outlet socket� A loose connection may
cause image degradation�
If there is power to the display, the front LED at the bottom of the display will
be either none or red� A red LED means the display is in standby mode�
Power On/Off Your New LCD Display
Press the power button on the remote control or press the power button
located on the side of the display� The display will power on�
Power button
or
Power Mode Status
Mode
On
Standby
Warming up
LED Status
None
Red
Blinking Red
When in on mode, the Display operates as follows if no external signal is
input�
1� When the external device is connected to the VGA terminal, the NO
SIGNAL menu is displayed and 15 seconds later the Display switches to
Summary of Contents for E585
Page 1: ...User s Manual E505 E425 E325 E585...
Page 40: ......