Document Revision 1
Electra Elite IPK II
20
Standard View
When a Table Area is selected, the grid to the right will updated with the new entry
range. For example, selecting Area 01, 1
st
Area (entry ranges 001~100) will result
in the grid showing the DID Table entries 001 to 100.
Table Entries
This is the grid to the right of the Table Area list. It defines DID Table Area entries
and how they are directed within the KTS. These settings are linked with 22-11.
Night Mode
Assign which Trunk Groups use the Table Area via this Night Mode selection. In
addition, use this to help define the Intercept Ring Group calls get forward to
during Night Modes. Do this by completing the following:
1.
Select a Night Mode.
2.
Select which Trunk Groups during this Night Mode will use the selected
Table Area.
3.
Define which Intercept Ring Groups calls get forward during this Night Mode.
Intercept Ring Group
Specifies if the call, during the selected Night Mode, will be directed toward an
Incoming Ring Group or voice mail. This setting only applies when the option is
enabled in the associated DID Translation Table entry. This setting is linked with
22-12.
Trunk Groups
Lists which Trunk Groups use the Table Area for DID during the selected Night
Mode. These settings are linked with 22-13.
Figure 12 Standard View - DID Table Area
Summary of Contents for ELECTRA ELITE IPK II
