Electra Elite IPK II
Document Revision 3
System Hardware Manual
6 - 141
___________________________________________________________________________________
___________________________________________________________________________________
Refer to
Table 6-50 VMS-U30 ETU LED Indications
.
Table 6-50 VMS-U30 ETU LED Indications
LED
Name
Description
LED 1
APP1
Indicates status of voice mail application software:
Green Application is running without errors.
Amber Application is running with errors.
Red
Application is not running.
LED 2
APP 2
Not Used
LED 3
Drive
HDD active light is red when the hard drive is accessed.
Do not reset the ETU while this switch is On.
LED 4
CF Power
On when SHUTDOWN switch is in RUN to indicate power on
the ETU.
LED 5
ICGA
Live LED flashes every 125 ms during normal operation.
LED 6
SHUTDOWN
Switch
Indicates that the switch has no software control.
On red only when SHUTDOWN switch is in RUN.
LED 7
Shutdown
On red when Switch S3 is in SHUTDOWN to indicate that
voice mail can be safely removed form the KSU.
LED 8
Power
On red when ETU is receiving power from the KSU.
LED 9
FED DSP
Used only for development purposes.
LED 10
CH 1
On red when voice channel 1 is Off-Hook.
LED 11
CH 2
On red when voice channel 2 is Off-Hook.
LED 12
CH 3
On red when voice channel 3 is Off-Hook.
LED 13
CH 4
On red when voice channel 4 is Off-Hook.
LED 14
CH 5
On red when voice channel 5 is Off-Hook.
LED 15
CH 6
On red when voice channel 6 is Off-Hook.
LED 16
CH 7
On red when voice channel 7 is Off-Hook.
LED 17
CH 8
On red when voice channel 8 is Off-Hook.
The first four channel LEDs are also used during startup to show that the
BICOM driver is loaded (LED 1), Scan disk successfully completed (LED 2),
CoSession Host successfully Loaded (LED 3), and voice mail started
successfully (LED 4). After the system is up and running and all channels are
ready to receive calls, these LEDs are Off. When voice mail does not start
successfully, all eight channel LEDs and LED 1 are on.
Summary of Contents for ELECTRA ELITE IPK II
