Electra Elite IPK II
Document Revision 3
System Hardware Manual
9 - 29
___________________________________________________________________________________
___________________________________________________________________________________
3.7
IP-R Unit
The Elite IP-R Unit allows connection to an IAD(8)-U( ) ETU with a MEGACO
Station Package in the Electra Elite IPK II.
Installing the IP-R Unit in the plug-in socket located at the bottom of the
Terminal transforms a DTH Multiline Terminal into an IP station. The user can
also connect a PC to the LAN through an RJ-45 Ethernet jack on the IP-R Unit
that acts as a switching hub.
Any Terminal (8D/16D/32D-1) with an IP-R Unit installed, in conjunction with
the IAD(8)-U() ETU (MEGACO Station Package), enables IP Telephony
stations for the Electra Elite IPK II System. The IP stations can provide
connectivity with the Corporate Elite over the local LAN (Ethernet).
3.7.1
IP-R Unit Specifications
Refer to
Table 9-4 IP-R Unit Specifications
.
Table 9-4 IP-R Unit Specifications
Feature
Specification
Interface
10/100 Base-T (IEEE 802.3), RJ-45
Protocol
Voice (UDP, RTP, and RTCP)
Signal (TCP, H.225 and H.245)
Jitter Buffer
Max 90 ms
Quality of Station (QOS)
Network Managed switches supporting Type
of Service (TOS) field and VLAN support
Local Power
27 V 750 mA via AC Adapter Base
Applications
TFTP (Client), DHCP Client, Megaco (H.248)
Standards
UL1459, FCC Part 68
Voice Specifications
G.711 (PCM Mu-law/A-law) G.729
Mountable D
term
D
term
8D, 16D, 32D-type telephone
Summary of Contents for ELECTRA ELITE IPK II
