___________________________________________________________________________________
6 - 8
Installing ETUs (Circuit Cards)
___________________________________________________________________________________
Document Revision 3
Electra Elite IPK II
S
ECTION
4
C
OMMON
C
ONTROL
ETU
S
The Electronic Telephone units described in this section control the common
functions of the KSU.
4.1
CPUII( )-U10 ETU
4.1.1
Description
The
CPUII( )-U10 ETU
is the Central Processing Unit for the system.
This ETU has a Central Processing Unit and a Microprocessing Unit
(MPU).
A 32-bit microprocessor executes the programs stored on the Flash
ROM ICs of the MPU unit. This controls the entire system when data
is transferred to and from other ETUs.
This ETU provides the following items:
J
Time Switch Control 512 CH
J
Digital Phase Lock Loop (DPLL)
J
Static Random Access Memory (SRAM)
J
DSPII-U10 (Daughter Board)
J
32-bit Processor
J
25 MHz Clock
J
64-channel DTMF Push Button Receiver (PBR)
J
Two blocks of 32 Conference Circuits with any number of
parties as long as the block limit is not exceeded.
J
External Music-on-Hold input (also used for station background
music)
J
Flash ROM (FROM)
J
Call Progress and DTMF Tone Generator
J
Memory Backup Battery (Retains memory for approximately
three years when fully charged)
J
Key Function (KF)/Multifunction (MF) Registration
J
Compact Flash Memory – 128MB maximum, Compact Flash
Type 1 only (must be FAT 16 format)
4.1.2
Installation
Each system must have this ETU installed in the CPU/EXP slot of
the basic B64-U20 KSU. Each system has one CPUII( )-U10 ETU.
Refer to
.
Summary of Contents for ELECTRA ELITE IPK II
